Pages

Friday, July 22, 2011

Explosion Card

An important aspect of Extravaganza, I believe, is showing other consultants how to do something.  Not tell them how something was done.  Since I was one of the lucky 28 teachers, I wanted to show them how to make an explosion card.  And I thought I'd share that here too.  :)  This was also my swap card at convention.

You are going to start with a square piece of paper.  For my card which is 3"x3", I used a 5 1/2"x 5 1/2" piece of paper.  You are going to want to stamp and distress your paper before you start folding it.


Step 1 completed
Step 1:  Fold the paper corner to corner.  Crease the seam.  Unfold the paper.  Fold the paper corner to corner the opposite way you just folded the paper.  Crease that seam and unfold the paper.  Your paper should look similar to this (without the lines). :}






Step 2: Turn your paper over and fold the paper in half.  The fold should be in the same orientation as the fold on your card.  So if your card opens toward the left, your fold line should be to the vertical (up and down).  Now here's the thing, though -- if you stamped something already on the paper, make sure the words are in the correct orientation as the card fold too.  You are going to glue on either side of the fold you are creating here.

I've probably confused the whazoo out of you, but you'll understand once you finish the folding -- or after you fold your paper the wrong way once.  :)

Step 2 completed.  I folded on the blue line
Now, I turn my paper over to fold this because it sets me up nicely for the next step.  It isn't necessary however.  Anyway, your paper should now look like this:








Pushing down on center to create the triangle
 Step 3: Now you want to fold the square into a triangle.  How you do this is by pushing on the center of the  paper (where the three folds intersect).  Since you flipped the paper over for the last fold, when you poke the center, the sides should "naturally" start folding.  This is how the paper should look from above:
Step 3 from above

Continue folding the paper until it looks like this:
Step 3 completed




first corner folded into center
Step 4:  Now that we're safely here, let's move on.  Take one corner and fold that corner into the center -- keep the top edges flush.  Crease this fold really well. Repeat this step for the other three corners.  I referred this "picture" as a dog with his ears flapping.  If you've only done two corners on one side, then you'll have a reindeer.
Step 4 completed
 










Step 5: This next step is the "trickiest" I think.  What you are going to do is reverse fold the fold you just created in step 4.  I hold just below the crease with one hand and open up the fold with the other hand. 

Once you open the fold up, you're going to push the center fold inward. 
Opened fold on it's way to be reversed
Reverse fold almost complete

First corner reverse fold complete
And when you're done pushing and reverse folding that corner you should have this:





That was so much fun, you are now going to repeat the reverse fold on the other three corners.



Step 5 completed.
 If everything has gone to plan, you should have a shape of a top or, if you are a baseball/softball fan, home plate:  









Step 6:This last step is to apply glue to the surface and glue it into the card.  I prefer the Bonding Memory Glue for this step.  The glue allows for great adhesion without lumps/waves Liquid Glass would.  And the Tombow just isn't strong enough to withstand the opening and closing of the card.  So, apply Bonding Memory Glue here on one side:
Glue goes all over this flat side.

Put this into the card, point toward the seam of the card. Close the card to glue the explosion piece into the card.  Open the card to the non-glued side and add glue to that side.  Close the card once more to adhere the explosion piece to the card.



My "Big thanks" card opens to the side
Step 7: Open and close the card and marvel at your work!  You did a great job!


Notice my center fold is in the same orientation as my card opens?  If your center fold goes the other way, you have a top opening card.

Monday, July 18, 2011

Baby Shoe Gift Box

This a gift box made from our new card box.

I've used a pattern from many years ago to make the shoes.  Before cutting them out, I stamped them.  After cutting I added an eyelet to the strap.  Ready for the pattern?  Get it by clicking here.

The dimensions of the box are:
Top: 6 1/2" width x 4 1/2" depth
Sides: 4 1/2" depth x 2 1/8" high
Front and Back: 6 1/2" width x 2 1/8" high.  The front has a notch.
Flap: 6 1/2" width x 1 1/8" high.

The Sophia paper I cut gave a 1/4" border on each side, therefore I cut the papers 1/2" less than listed above.  The edges of the box were sponged in Hollyhock.  I also used Hollyhock to stamp the flowers on the shoes. The name Daisy was mounted after sponging the Color Ready letters.  Not shown is the tissue paper inside that I stamped in coordinating colors.


Supplies Used (all CTMH):
X7131B Sophia Paper Packet
D1460 Love Ya (tag)
B1393 Joyful Jar (shoes)
Z2128 Hollyhock Ink
Z2111 Chocolate Ink (tag)
Z2118 Desert Sand Ink (paper distressed)
Z2169 Vanilla Cream Ink (paper distressed)
Z2106 Blush Ink (paper distressed)
Z1466 Bling Assortment
Z1384 Pink Collection Designer Ribbon
Z1383 Sweet Leaf  Stitched Grosgrain Ribbon
Z1229 Chocolate Soft Set Eyelets
Z1208 Soft Set Eyelet Tool

Wednesday, June 22, 2011

Mystify Layout

A layout using Magic and fun flaps.  My girl friend and her girls and my girls and I went up to Big Bear last summer.  We had a great time, and I even took some pictures to capture our adventures.  I had several more pictures than I needed for a two page layout, but not enough for a second layout.  I compromised by adding a flip-flap thereby using the extra pictures.  :)


Left side of layout (no flaps)

Right side of layout (flap down)


This is the layout if there weren't any flip flaps used, and it's what it looks like when you turn the page to it.











Next we have the back side of the flap and what is on the base of the right side.

Right side with flap open
I chose to mimic the right side on the top flap.  You will notice that the far right of the base shows when the flap is closed (see above right picture).  And the back side of the flap mimics the left base but doesn't have the vertical strip.  I didn't have to mimic either pages but wanted that sense of continuity.  And if I had two vertical pictures I would have used them on the back side of the flap.  Since I didn't, I enlarged the horizontal picture and used it alone.

The Lucky paper packet was my choice here because it of the more masculine and outdoorsy feel.  I paired it up with some level 2 accessories -- left hand page and top flap highlight them mostly.  If you look carefully at the right base page you'll see a sunset tab sticking out behind the upper right picture.  That is a pull for an additional picture behind!

Creativity with Trees and Things Stamp Set

Even though this video features the one stamp set, you can use the techniques for lots of other sets.  :)


Wednesday, April 27, 2011

JOY block

The last side of my project is for winter time.  Because of the colors and word, I can display it for several months.  And in California, you have to remind yourself it's still winter -- even in January.  Tee hee.  :)

But, Dana, there are only three letters in the word "joy" and you have four blocks.

Never fear, my friends!  That's why we have dimensional element snowflakes!!

Here I used a the blue hues of Miracle paper packet to compliment Petal.  It was a joy working on this word (pun intended... and the drum sounds).  In fact, I was in Mammoth among lots of snow while working on this word.  Each letter is outlined with fun flock to make it look like condensation on a "window".


 Glitter was added to several rows of Ready Color Borders for a snow mound (alright, so it's a small mound).  The Shimmer brads finishes the letter.
 Clear buttons and colored floss help with this letter "O".  The hard part of this whole project is to have a different look for each of the letters.  By the time I got to this word, I asked myself often, "what haven't I done yet?".  By adding lots of different sized buttons, all on one side, change the look from, say the "O" of Hope.
 Another simple yet elegant letter.  The brads set the letter off and combined with all of the blocks, it lets the reader know that it's the end of the word.
Finally, I embossed the snowflakes in white in the background.  I wanted the feel of lots of snow (since there was a ton of it).  Some of the snowflakes I went over with petal ink to spread the color around more.  And I sponged the snowflake with Pacifica ink.

And there you have my major submission for convention.  You may have already seen some of the cards and my layout.  If not, you can click on Labels: Convention Submission (below) and see everything I've posted so far.  I think I am only missing two more items... but I'll save that for another night.  I'm going to bed.  :)

LOVE block

Did I mention I was chosen to teach at convention this year?  After four years of trying, I got help from my upline, and submitted something worthy of CTMH.  I'm really excited and nervous!!

The third side of my blocks highlight the word "LOVE".  This is another word that can hang out on the mantel year round.  This word uses the Sweetheart Paper packet, sponging around the all papers with black ink.  The letters L, V, and E use the back side of the striped paper.  The O has three other papers in use.  Let's dive a little deeper...


 Another simple letter.  I used the red assortment sparkles and Cranberry ribbon here.
Here, I layered dimensional heart elements on topf of each other.  I got this idea from Pnina and a card swap she did at Kay's meeting (thanks, Pnina).  :)  Because of the high layers, I put foam tape underneath to retain the level of the letter.  The black is all from the black mini-medley accessories and include a button, brad, ribbon, and corduroy brad.
 Here the Just Blooms flowers take center stage even though they are in the background.  This paper is wonderful because Tulip (here) and Cranberry (letter L) both look great!  The heart is a dimensional element covered in B&T paper.
Another simple letter.  :)  The flower is from the Red Button Assortment and the tags are from the black and tulip mini-medley.  White hemp is tied in a bow.

WISH Block

The "i" of this word is my favorite.  You know how you get an idea in your mind and you work at it until it looks the same in reality as in your mind?  Well, I usually have to settle because it doesn't always work out the way you want.  This one is an exception!

The WISH block can be used for birthdays or any celebration (like the Fourth of July), which is why I used the Fanfare paper packet.  The letters have cardstock that I spritzed with a mixture of pearl paint and water. 


 Nice and simple.  The ink is White Daisy which is a pigment ink.  I set it with our craft heater, and tied it on with white embroidery floss.
 The cupcake frosting is our liquid applique.  I let it dry over night so it would be a smoother finish.  I then added bitty brads to look like those little balls (I can't think of the proper name for them).  The wrappers are stamped on white textured cardstock and mounted in the middle.  The flame is two layers of dimensional element stars.  The bottom layer is sponged in buttercup ink.  The second layer has a star from the B&T paper, rotated, and the top layer is a cut out star.
 The S used Fanfare's My Stickease for the banner. I cut the border to make it sag a little. I then added a brad between the two pieces so that the banner is being held up by the brad. Okay, I'm a little crazy so I cut out a star from the B&T paper and glued it onto the brad.


Buttons, My Stickease, and a Canvas button with a cut out star make for excellent balloons for this letter.  The strings are waxy flax.

HOPE blocks

You may have watched my video, well, now it's time to see the blocks up close.  I took four My Creation Cubes and created words on each side.  This one is HOPE.

For this side, I used Mayberry paper as my choice of paper.  I sponged with cocoa around each of the letters (I kept them white) and the papers.  The "P" is stamped on in Olive ink.







I'd list everything I used except that it would take me quite some time to look everything up.  I figure it's the general idea that is more important.  If you'd like to know exactly what I used, you can email me at dskdots@san.rr.com and ask specifically.  :)

A Tweet Card

Here I wanted to show two things.  The first is adding a second color to a solid stamp (see the stomach) and that cut out items don't always have to go on top (see the branch).


How do you accomplish the two tone bird?  First, you need to twist, twist, tap, tap, tap your solid stamp in the lightest ink pad (Creme Brulee here). Next, take a sponge dauber (or tissue paper for texture as I did here) and sponge with a different color ink (Sunset here) onto the inked stamp.  It's best to work quickly, but you can always give your stamp a huff to bring the moisture back outward before stamping.  Once the image was stamped, I took a  marker and used the fine end to draw in the legs and feet, and the beak.

For some reason I enjoy cutting small details.  How do I cut into small areas?  I use our micro-tip scissors which give me GREAT control.  I start cutting, usually a little way from (and going toward) the detailed area (the feet here).  That way I have a lot of paper to hold onto while I move the paper.  Notice what you just read?  I move the paper around my scissors, not the scissors around the paper.  I will adjust the scissors so they are more open within the detailed areas.  I find the back to middle of the scissors give me more control than the tip.  Again, I move the paper around my scissors until I'm past the detail area and then use more of the scissors with each "stroke."  I applied the same technique for the branchs and flowers.

All Products CTMH:
X7128B  Olivia Level 2 Paper Packet (background and texture paper)
X5754    Creme Brulee Cardstock
X5642    Cocoa Cardstock
A1104    A Tweet Stamp Set
Z2114    Cocoa Ink Pad
Z2167    Creme Brulee Ink Pad
Z2191    Sunset Ink Pad
Z2137    Olive Ink Pad
Z2214    Cocoa Marker
Z2203    Bamboo Marker (beak)
Z534      Micro-tip Scissors
Z1333    Mocha Opaques Adhesive Gems
Z1151     3-D Foam Tape (bird)




Friday, April 08, 2011

Studio J layouts

If you haven't tried Studio J, you should.  It doesn't cost anything but time which you will make up the more you use the program.  Go to dsk.myctmh.com and click on Studio J.  You'll set up an account (if you don't already have one) and go.  The program is very powerful.  It allows you to resize your pictures, add journalling and title, add accessories, and change out paper as you see fit.

Like I said, you can try it free.  The program will store your work for 3 months free.  If you become a member to Studio J, you will get the prints at 50% off, are entitled to one free shipment per month, and free jpegs for posting online.  There are also exclusive layouts to members.  But don't take my word for it, go and try it!!

These are a few layouts I created from my nephew's Court of Honor where he received his Eagle Scout.



 The layouts come printed as 12x12 pages and are ready to be slipped into the page protectors and album.  I gave these to my sister for her birthday.

As you can see, there are buttons and ribbon on the layouts.  I chose the colors of the buttons and the color of the thread.  The brads were my color choice too!